WorkSafe is warning company directors that if they are not making sure their company’s operations are safe and healthy, they face enforcement under the Health and Safety at Work Act 2015.
The warning follows the first WorkSafe prosecution and subsequent conviction and sentencing today of a director and his company for health and safety failings.
“Directors have explicit legal duties to undertake due diligence on their company’s adherence to health and safety obligations and failing to do so not only puts their workers at risk, but it also puts them in our sights,” WorkSafe’s Head of Specialist Interventions at the time Simon Humphries said.
“As governors of their businesses, they have more ability than anyone else to influence their business’ operations to ensure they’re taking all the steps required to protect workers and others on their sites from health and safety risks. If they’re not doing so, they’re failing in their duties,” Mr Humphries said
On 18 October 2021 in the Tauranga District Court, Jon-Brian Parker and his company Kimberley Tool and Design (NZ) Limited were convicted and fined over a November 2018 incident in which a worker suffered crushing injuries while operating a metal press. The ends of his right middle and ring fingers required amputation as a result.
WorkSafe investigated the incident and found that the press was not properly guarded and did not have the required emergency stop button. The investigation also found previous history of the machine not operating as expected and had not identified this as a risk.
Mr Humphries said the company’s induction and staff training was haphazard and undocumented, and the company could not produce any evidence of the victim having been properly trained in the press’ use.
“What makes this case all the more concerning is that the company has had two previous convictions for incidents involving presses and injuries to workers’ hands and fingers.
“At the time of the incident the company was also non-compliant with three WorkSafe Improvement Notices relating to non-implementation of a health and safety manual; inadequate safe operating procedure; and training issues.
“With that history, Mr Parker should have known he had to step up and fix the litany of problems evident in his business. He did not, and a worker was unnecessarily injured,” Mr Humphries said.
- Jon-Brian Parker appeared in the Tauranga District Court on 18 October 2021.
- He was sentenced under sections 44(1), 48(1) and 48(2)(b) of the Health and Safety Work at Act 2015.
- Being a director of a PCBU, namely Kimberley Tool and Design (NZ) Ltd, and having a duty as an Officer to exercise due diligence to ensure that Kimberley Tool and Design (Ltd) complies with its duties as a PCBU, did fail to comply with that duty, and that failure exposed workers, including the victim, to a risk of serious injury arising from exposure to a crushing hazard created by the moving parts of the press when in operation.
- The maximum penalty is a fine not exceeding $300,000.
- A fine of $35,000 was imposed.
- Kimberley Tool and Design (NZ) Ltd was sentenced under sections 36(1)(a), 48(1) and 48(2)(c) of the Health and Safety at Work Act 2015.
- Being a PCBU, having a duty to ensure so far as is reasonably practicable the safety of workers who work for the PCBU, including the victim, while the workers are at work in the business or undertaking, namely operating the press, did fail in that duty and that failure exposed workers to risk of serious injury arising from exposure to a crushing hazard created by the moving parts of the press in operation.
- Carries a maximum penalty of $1,500,000.
- A fine of was $120,000 was imposed.
- Reparation of $30,000 was ordered.